More capability for bigger projects

Land Clearing & Site Work in Appomattox, VA

With a Bobcat T740 track loader in the lineup, Handyman Unlimited can take on eligible land clearing, pond restoration, outbuilding demolition, site preparation, grading, driveway, and drainage projects directly.

Bobcat T740 track loader equipped with a brush cutter attachment

A wider range of machine work

Four ways to move a bigger property project forward

The T740 creates useful options across four connected project categories. Each one begins with the property, access, and result rather than a generic hourly machine promise.

Front view of a Bobcat T740 track loader with a brush cutter attachment
The T740 fitted with a brush cutter attachment.

01 / Service range

Pond Restoration & Land Reclamation

Reopen overgrown pond edges and reclaim areas where invasive brush, dense undergrowth, and years of growth have reduced access or usable space.

  • Forestry mulching around eligible pond perimeters
  • Clearing choked shoreline undergrowth
  • Removing defined invasive brush
  • Restoring access along overgrown banks
Bobcat T740 track loader with a bucket near a wooded area
The bucket-equipped T740 supports eligible loading and material-handling work.

02 / Service range

Demolition Services

Remove eligible deteriorated detached structures with the machine work, debris plan, and desired condition of the cleared area defined before work begins.

  • Rotting sheds and small outbuildings
  • Eligible old barns or detached garages
  • Controlled machine-assisted dismantling
  • Agreed loading, hauling, and disposal plan
Side view of a Bobcat T740 track loader with a bucket attachment
The tracked T740 with a general-purpose bucket.

03 / Service range

Site Prep, Excavating & Leveling

Create a more workable starting point for a shed, outbuilding, or planned improvement by shaping the agreed area around access, elevation, and drainage needs.

  • Clearing the defined machine work area
  • Excavating and redistributing suitable material
  • Rough grading and leveling
  • Preparing for the next clearly defined project phase
Bobcat T740 track loader with a brush cutter beside a dump trailer
The machine, attachment, and hauling setup are matched to the written scope.

04 / Service range

Driveway Restoration & Drainage

Address ruts, washouts, uneven gravel, and recurring runoff with a plan that considers where the water comes from and where it can move safely.

  • Gravel redistribution and surface leveling
  • Defined washout and rut repair
  • Drainage swales and runoff shaping
  • Agreed French-drain excavation and installation

Why the new equipment matters

One machine, multiple attachments, one accountable scope

The Bobcat T740 is a tracked platform that can support clearing, lifting, pushing, digging, grading, and material handling with the appropriate attachment. Handyman Unlimited is fully insured and can handle eligible machine work directly, but the site still determines which attachment and approach make practical sense.

  • Tracked access and traction for eligible rural sites
  • Attachments selected around the actual task
  • Machine work coordinated with cleanup and finish expectations
  • Project fit confirmed before equipment is scheduled

The project goal

A practical result, defined before the work begins

Some property projects need more reach, traction, lifting capacity, and attachment flexibility than standard handheld equipment can provide. The Bobcat T740 expands what Handyman Unlimited can handle while keeping the planning, communication, and accountability with the local team you hired. The goal is not simply to bring a machine onto the property. It is to match the equipment, attachment, access plan, and finished result to the actual site.

Bobcat T740 track loader with a bucket parked near a wooded area
Machine access, attachment choice, terrain, and the desired finished condition are reviewed before the scope is defined.

What the service may include

Scope first. Assumptions out.

Because land and site conditions vary widely, the written estimate defines the exact work area, equipment plan, material handling, and finished condition. A project may include:

  • Forestry mulching and brush clearing in defined areas
  • Pond-perimeter clearing and reclamation of overgrown banks
  • Removal of invasive brush and choked shoreline undergrowth
  • Controlled demolition of eligible sheds, barns, detached garages, or outbuildings
  • Site preparation for sheds, outbuildings, or other planned improvements
  • Excavating, rough grading, leveling, and redistribution of suitable on-site material
  • Gravel driveway restoration, washout repair, and surface leveling
  • Drainage improvements, swales, or agreed French-drain excavation
  • Loading, stockpiling, or hauling arrangements defined in the estimate

A good project fit

This may be right for you if…

  • An overgrown pond edge, bank, or property section needs machine-assisted clearing
  • A deteriorated detached outbuilding is taking up usable space
  • A shed, outbuilding, or improvement needs a prepared and leveled area
  • A gravel driveway has washouts, ruts, or uneven material
  • Runoff is contributing to recurring wet areas or erosion
  • You want one accountable local team to define the machine work and finished scope

How the work moves forward

Three clear stages, with planning built in

  1. 01

    Walk the property

    Review the goal, access, terrain, boundaries, utilities, structures, water movement, and areas that need protection.

  2. 02

    Define the machine plan

    Match the eligible work to the equipment, attachment, material plan, disposal needs, and finish expectations before pricing.

  3. 03

    Complete and review

    Carry out the agreed machine work, manage the active area, and review the defined result before the project closes.

Planning and care

Prepare the property, not just the work area

Machine access, gates, slopes, overhead clearance, soft ground, buried utilities, septic components, wells, property lines, and nearby structures can all affect project fit. Required utility markings, permissions, and known site information should be addressed before work begins.

Permits, environmental requirements, erosion controls, waterway restrictions, hazardous materials, structural disconnection, debris disposal, imported aggregate, export hauling, and final compaction are not assumed. Each responsibility must be identified in the written scope.

Weather and soil moisture can change when heavy equipment can work without causing avoidable damage. Scheduling may need to respond to recent rain and site conditions.

Service questions

What homeowners often ask

What kinds of projects can the Bobcat T740 support?

The current focus includes defined land clearing, pond-perimeter reclamation, eligible outbuilding demolition, site preparation, excavating, grading, gravel driveway restoration, and drainage work. The property and requested result still need to be reviewed before project fit is confirmed.

Can you clear an overgrown pond bank?

Pond-perimeter forestry mulching, invasive brush removal, shoreline access clearing, and reclamation of overgrown banks may be a fit. Terrain, waterway restrictions, erosion risk, access, and the material plan must be evaluated for the specific pond.

What types of structures can you demolish?

Eligible detached sheds, barns, garages, and outbuildings may be considered. Size, construction, utilities, hazardous materials, access, permits, debris handling, and disposal determine whether the structure fits the service.

Can you prepare and level a site for a shed or outbuilding?

Site preparation, excavating, rough grading, and leveling may be included when the planned improvement, elevations, material needs, access, drainage, and finish requirements are clearly defined.

Do you repair gravel driveways and drainage problems?

The service may include repairing washouts, redistributing or adding agreed gravel, leveling the drive, shaping runoff paths, excavating swales, or installing an agreed French-drain system. Persistent water problems need a site-specific plan rather than a universal fix.

What determines the estimate for machine work?

The estimate depends on access, terrain, acreage or work area, attachment needs, soil and moisture conditions, utilities, material quantities, hauling, disposal, permits, weather, and the defined finished result. Estimates are free, but a site visit may be needed before pricing.

Start with a clear conversation

Is land & site work the right next project?

Share the location, current condition, and result you have in mind. Our team can confirm project fit before the scope moves forward.